Description:

Applications:

• Metal
• Furniture
• Composites
• Construction
• Woodworking

Direction:

1. Ensure that the surfaces to be bonded are clean, dry, and free from dust, oil, or grease.
2. Apply E-136 adhesive to both surfaces using a brush, roller, or spray equipment to achieve a uniform coating.
3. Allow the adhesive to dry until it becomes tacky to the touch, typically around 10 to 20 minutes, depending on the environmental conditions and the surfaces involved.
4. Press the surfaces together evenly and firmly to ensure a strong bond.
5. For best results, clamp or press the bonded surfaces together to ensure even contact and strong adhesion. Clamping time may vary based on materials and conditions but typically ranges from 1 to 2 hours.
6. Allow the bonded assembly to cure fully, which usually takes about 24 hours for maximum bond strength.
7. Use solvents such as turpentine or white spirit as a thinner or cleaner.