Bitumen Sealing Compound

Description:

Applications:

• Roofing
• Metal Structures
• Concrete and Masonry
• General Waterproofing

Features:

Method of application:

1. The surface must be clean, dry, and free from loose particles, dust, and debris. Any cracks or holes should be repaired. For metal surfaces, grit blasting to achieve a rough texture is recommended.
2. Apply using a brush, roller, or spray equipment. Apply it evenly in one direction. It's usually applied in two coats to avoid any gaps or missed spots. Allow each coat to dry before applying the next one.
3. The coverage can vary depending on the surface type. For metal and smooth surfaces, it's about 10 square meters per liter per coat, while for concrete and porous surfaces, it's about 5-6 square meters per liter per coat.
4. Allow the final coat to dry completely before using the surface

Method of application (Sealant):

1. The surface must be dry and clean.
2. Cut the conical tip off and thread.
3. Screw on the nozzle and cut at 45 degrees to the required size.
4. Insert cartridge into caulking gun.
5. Push sealant ahead for a uniform bead.
6. Tool within 10 minutes.
7. Allow the compound to cure fully before exposing it to water or other elements.