E-1287 Water Based Emulsion

Description:

Applications:

• Paper
• Furniture
• Cardboard
• Woodworking
• Paper bonding

Direction:

1. Ensure that the surfaces to be bonded are clean, dry, and free from dust, oil, or grease.
2. Apply E-1287 adhesive to one or both surfaces using a brush, roller, or spray equipment to achieve a uniform coating.
3. Allow the adhesive to sit for a few minutes until it becomes tacky but not dry.
4. Press the surfaces together evenly and firmly to ensure a strong bond.
5. For best results, clamp or press the bonded surfaces together to ensure even contact and strong adhesion. Clamping time may vary based on materials and conditions but typically ranges from 30 minutes to 2 hours.
6. Allow the adhesive to cure fully, usually within 24 hours for maximum bond strength.
7. Clean any excess adhesive with water or turpentine while it is still wet. Once dried, the adhesive may be more difficult to remove.